Jem Arnold

@jemarnold

PhD candidate & physiotherapist | 🩸Iliac artery endofibrosis / FLIA | Endurance testing & NIRS. Treat declarative statements as questions?

381 Siguiendo663 Seguidores457 Publicaciones

Bluesky

¿Es tu perfil?Reclámalo y jemarnold.dirty.social es tuyo.Reclamar perfil

Jem Arnold@jemarnold· 7d

4/5 A minor ⚠️ breaking change to `shift_mnirs()`, `replace_mnirs()`, and `extract_intervals()`: `group_channels` arg handles channels `group_intervals` arg handles intervals for `extract_intervals()` Options are “distinct”, “ensemble”, or a custom group list

data_rescaled <- rescale_mnirs(
data_clean,
nirs_channels = c(smo2, thb), ## pick the channels
group_channels = "distinct", ## how they are grouped
range = c(0, 100), ## same range for both channels
)

## `group_intervals replaces `event_groups`
ensemble <- extract_intervals(
data_rescaled,
group_intervals = "ensemble",
start = by_time(124, 486, 848, 1210), ## extract four intervals,
end = by_time(364, 726, 1088, 1450), ## return one ensemble-averaged
span = c(-10, 60)
)

ensemble
#> $ensemble
#> # A tibble: 156 × 3
#> time smo2 thb
#> <dbl> <dbl> <dbl>
#> 1 -10 79.8 28.4
#> 2 -8 77.0 33.3
#> 3 -6 80.5 37.1
#> 4 -4 77.6 37.9
#> 5 -2 72.8 32.8
#> # ℹ 151 more rows

plot(ensemble, time_labels = TRUE)

Jem Arnold@jemarnold· 7d

3/5 {mnirs} 0.7.0 can now process each `nirs_channel` with independent settings: You can `replace_mnirs()` invalid values with different criteria each for “smo2” and “thb” Or `filter_mnirs()` one channel with “moving average” and another with “butterworth”, side by side

data_clean <- replace_mnirs(
data,
invalid_above = list(smo2 = 80, thb = 13), ## assign independent values
invalid_below = list(thb = 10), ## assign only one channel, ...
invalid_values = list(smo2 = 0), ## or the other (with a warning)
method = "none" ## replace with NA
)

## rows where invalid values were replaced
invalid <- data[is.na(data_clean$smo2) | is.na(data_clean$thb), ]

## plot the clean data and overlay replaced invalid values
plot(data_clean, time_labels = TRUE) +
geom_line(data = data, aes(y = smo2, colour = "smo2"), alpha = 0.2) +
geom_point(data = invalid, aes(y = smo2, colour = "smo2")) +

geom_line(data = data, aes(y = thb, colour = "thb"), alpha = 0.2) +
geom_point(data = invalid, aes(y = thb, colour = "thb"))

Jem Arnold@jemarnold· 7d

2/5 Core processing functions now accept a list of data frames or grouped dfs with `dplyr::group_by()`: You can `filter_mnirs()` over a list of dfs from multiple `read_mnirs()` files Or `extract_intervals()` from a longer session and `rescale_mnirs()` each independently

data_list <- filter_mnirs(
data = list(df1, df2),
method = "butterworth",
type = "low",
order = 2,
W = 0.2
)

data_list
#> $interval_1
#> # A tibble: 211 × 2
#> time smo2
#> <dbl> <dbl>
#> 1 -60 54.0
#> 2 -58 53.6
#> 3 -56 53.1
#> 4 -54 52.6
#> 5 -52 52.3
#> # ℹ 206 more rows
#>
#> $interval_2
#> # A tibble: 211 × 2
#> time smo2
#> <dbl> <dbl>
#> 1 -60 62.5
#> 2 -58 61.9
#> 3 -56 61.1
#> 4 -54 60.5
#> 5 -52 60.4
#> # ℹ 206 more rows

plot(data_list)

Jem Arnold@jemarnold· 7d

{mnirs} R package for reading, processing, analysing muscle near-infrared spectroscopy data🦵🔦 updated to 0.7.0 Mostly internal performance improvements getting ready for `mnirs::analyse_kinetics()` soon! github.com/jemarnold/mn... Here are the key changes: 1/5🧵🔗👇 #rstats #nirs #muscleoxygenation

Jem Arnold@jemarnold· 19d

Doctors, surgeons, clinicians, coaches can directly access the clinician questionnaire from the QR code or link here: mmc.myresearchmanager.com/Survey/9h4fm

ARE YOU AN EXPERT IN FLOW LIMITATIONS IN THE ILIAC ARTERY (FLIA)?
HELP IMPROVE TREATMENT AND FOLLOW-UP CARE FOR ATHLETES

We want to hear from you for an international research study.

WHO CAN PARTICIPATE

You can participate if you are:
professionally involved in the diagnosis, treatment and/or follow-up of FLIA

WHAT DOES PARTICIPATION INVOLVE
Online questionnaire
Approximately 15–20 minutes
Completely voluntary

JOIN THE STUDY

Scan the QR code or use the link in the description.

PLEASE SHARE

Do you know other experts who have broad experience with patients with FLIA?
Please send them this study information.

STUDY INFORMATION

The study is conducted by the INSITE group:
INternational Study group for Identification and Treatment of Endofibrosis

Questions: flia@mmc.nl

Jem Arnold@jemarnold· 19d

Another call for input! 📢 CLINICIANS, COACHES, and ATHLETES managing recovery from surgery for flow limitations in the iliac artery FLIA / endofibrosis We'd love to hear your experiences to help improve care for athletes. Please contact email below 👇 #cycling #sportsmedicine #sportmedicine

HAVE YOU HAD SURGERY FOR FLOW LIMITATIONS IN THE ILIAC ARTERY?

HELP IMPROVE FUTURE CARE FOR ATHLETES

We want to hear from you for an international research study

WHO CAN PARTICIPATE

You can participate if you:

are 18 years or older
have had surgery for flow limitations in the iliac artery (FLIA/endofibrosis)
can complete an English questionnaire

WHAT DOES PARTICIPATION INVOLVE

Online questionnaire
Approximately 15–20 minutes
Completely voluntary

JOIN THE STUDY

contact email: flia@mmc.nl

PLEASE SHARE

Do you know other athletes who have had iliac artery surgery?

Please send them this study information

STUDY INFORMATION

The study is conducted by the INSITE group:
International Study group for Identification and Treatment of Endofibrosis

Questions: flia@mmc.nl

Jem Arnold@jemarnold· Jul 3

In my brief experience so far, most likely a reversion to Opus 😅 #rstats

Screenshot of warning message from Anthropic Fable during routine R coding assistance: "Fable 5's safeguards flagged this message. The safeguards are intentionally broad right now and may flag safe and routine coding, cybersecurity, or biology work. These measures let us bring you Mythos-level capabilities sooner, and we're working to refine them. Switched to Opus 4.8. Send feedback with /feedback or learn more: https://support.claude.com/en/articles/15363606"

Jem Arnold@jemarnold· Jun 26

Oops, error in the subtitle coefficient results. Height alone is significant

Jem Arnold@jemarnold· Jun 26

Ooh, good thought, thanks! Yes in fact weight alone is a slightly better explanatory model at ~42% explained variance Both height and weight together reduce r^2 very slightly to 40%, meaning more of the shared explanatory value is provided by weight alone

Jem Arnold@jemarnold· Jun 26

Turns out significant between-participant relationship with notable within-participant variation. Height alone explains around 37% of the variation in recirculation time. Adding 'fitness' (% predicted VO2max) is not significant and only adds +1% marginal explained variance to that 🤔

Jem Arnold@jemarnold· Jun 26

This paper found similar ~11sec mean recirculation time in females & males treadmill walking at 3 mph (12:25/km) @ 5% grade So already at walking intensity, or cycling near V̇O₂max, bulk blood flow velocity is nearly the same?😮 Chapman & Fraser 1954 doi.org/10.1161/01.C...

Individual data table and representative plot of tracer dye concentration curves in 23 “normal young men” and 11 “normal young women” during rest and exercise (treadmill walking), with per-participant values reported for age, cardiac output, cardiac index, and mean circulation time (highlighted for this post). Plot shows a sample dye tracer accumulation curve in colorimeter density over time, peaking 10-sec after (presumably) injection and recirculation appearing after approx 10-sec during exercise. “TABLE 2.—Cardiac Output, Cardiac Index, and Mean Circulation Time at Rest and during Exercise in 23 Normal Young Men”. “FIG. 1.—Sample dye curves, at rest and during exercise, showing the extrapolated values after the beginning of recirculation.” “TABLE 3.—Cardiac Output, Cardiac Index, and Mean Circulation Time at Rest and during Exercise in 11 Normal Young Women”.

Jem Arnold@jemarnold· Jun 26

How long does it take for blood to make a full round-trip around the entire body during exercise? 🫁🫀🔁🦵 Only 10-sec! That’s way faster than I intuitively would have expected But we’re just reproducing what’s been known for the last century👇 #science #medicine #rstats #datavis

A figure showing near-infrared spectroscopy (NIRS) tracing over the vastus lateralis quadriceps muscle during a cycling VO2max interval, with indocyanine green (ICG) dye tracer injected into the median cubital vein at time 0:00. As the dye appears with blood flow in the VL under the probe, the optical signal rapidly reaches a peak at ~10-seconds after injection. The concentration briefly decays as the dye tracer flows out of the insonation site, then rises to a second and third peak at ~10-sec intervals, showing net transit time around the entire systemic circulation (from quadriceps, via venous blood back through lungs to heart, and out again via arterial circulation to the quadriceps). Figure title: “NIRS-ICG dye tracer monitored at vastus lateralis during cycling intervals. Systemic blood recirculation time ≈ 10 seconds”. Text label: “Dye concentration peaks under the NIRS probe every ~10-sec”. Caption: “Data: (manuscript in preparation) | Visuals: @jem_arnold”

Jem Arnold@jemarnold· May 26

yup!

Jem Arnold@jemarnold· May 26

Participant 1RM strength would insignificantly influence SmO2 slope across workload relative to %1RM (top plot) and significantly influence intercept but not slope on abs kg load (bottom plot): Stronger people would have higher SmO2 at the same kg than less strong people. Revolutionary! 😄

m_rel <- lmer(smo2 ~ load * strength + (load | id), data = df)
m_abs <- lmer(smo2 ~ load * strength + (load | id), data = df_abs)
- all loads paired within participant
- smo2 continuous from Train.Red normalised individual physiological range
- load continuous abs (kg) or relative (%1RM) at prescribed workloads seq(0.2, 0.6, 0.2) and c(10, 15, 10) for each participant
- strength continuous 1RM in kg

Jem Arnold@jemarnold· May 25

From whiteboard hypothesis to predictive model supporting H1 in a ~15 min conversation. Very satisfying! #rstats

Picture of whiteboard and screen. Whiteboard shows hand-drawn hypothesised relationship between muscle oxygen saturation and resistance exercise load, for individuals with "high" and "low" strength. Load is plotted as absolute (kg) and relative to one-rep max (%).

Screen shows resulting plots from modelling the same relationships with linear mixed effects models. Modelled plots mirror the hypothesised relationships on the whiteboard. A satisfying result!

Jem Arnold@jemarnold· May 25

For example, we can also use it to filter BxB data by either time- or breath-averaging, specifying ONE OF either `width` (sample/breath-averaging) or `span` (time-averaging

Screenshot of code demonstrating how to use `mnirs::filter_mnirs()` on metabolic data. Only one of EITHER `width` OR `span` should be specified for respective breath- or time-averaging:

mnirs::filter_mnirs(
cpet_data,
nirs_channels = VO2, ## not NIRS data 🤫
time_channel = TIME,
width = 5, ## EITHER width alone is 5-breath averaging
span = 5, ## OR span alone is 5-sec time-averaging
partial = FALSE, ## exclude partial-length windows
na.rm = TRUE ## ignore `NA`s
)

Jem Arnold@jemarnold· May 25

This is how we can resample breath-by-breath metabolic data to 1 Hz using `mnirs::resample_mnirs()` The secret is {mnirs} works on many time series data, not just NIRS 🤫 #rstats #nirs #cpet

Screenshot of code and plot showing how to use mnirs::resample_mnirs() to resample breath-by-breath metabolic data to 1 Hz sample rate. Plot shows BxB data points overlaid on the same interpolated data, showing how the time gaps between samples are filled.

library(mnirs)
library(ggplot2)

## breath-by-breath metabolic data
cpet_data

## resample to 1 Hz and linearly interpolate
cpet_resampled <- resample_mnirs(
cpet_data,
time_channel = TIME,
resample_rate = 1,
method = "linear"
)
cpet_resampled

ggplot(cpet_data, aes(TIME, VO2)) +
theme_mnirs() +
scale_colour_mnirs() +
geom_point(data = cpet_resampled, aes(colour = "1 Hz")) +
geom_point(aes(colour = "BxB"))

Jem Arnold@jemarnold· May 16

And now I think I need to be accounting for nesting, expecting biological variation, rather than strict repeated measures. Which would reduce the limits of agreement further 🤔. I will have to clarify which is more appropriate Smooth level has greater effect on nested than RM data.

Jem Arnold@jemarnold· May 16

. @fredrikmentzoni.bsky.social here is that sensitivity analysis on smoothing levels for BxB Tymewear vs Parvo respiration rate Methods are un-smoothed; moving-avg by breath; moving-avg by time, and binned by time (reduce to single mean sample per bin)

Jem Arnold@jemarnold· May 13

Woops! Found a substantial memory allocation issue in my code while trying to process a couple 300k+ row data frames. Think I've got it sorted now. Probably need to push a hotfix for this to CRAN 😬

Jem Arnold@jemarnold· May 9

speaking of test-retest differences, we compared a few common metrics to give coaches & athletes reference values to use when comparing data day-to-day If we know our uncertainty, we can be *more* confident where we prescribe training targets www.frontiersin.org/journals/spo...

Screenshot of figure for representative trial with cycling workload showing incremental 5-min stages, with muscle oxygen saturation (SmO₂), heart rate (HR), volume of oxygen uptake (V̇O₂), blood lactate ([BLa]), and rating of perceived exertion (RPE) responses as a function of progressive graded intensity accross workloads from 100 to over 300 Watts. RPE, HR, and VO2 mostly respond linearly. BLa rises pseudo-exponentially. SmO2 falls curvilinearly.

Jem Arnold@jemarnold· May 9

Always important to consider how relevant & valid are physiological tests to predict real-world training targets / performance outcome If we want to maximise FatOx in a training session, we can do so in a wide intensity range. FatMax isn't magic 🧙‍♂️ pubmed.ncbi.nlm.nih.gov/24022578/

Screenshot of Abstract:

The intensity that elicits maximal fat oxidation (Fat max ) is recommended for training fat metabolism. However, it remains unclear whether Fat max leads to the highest fat oxidation rates during prolonged exercise. It was hypothesized that there are no differences in fat oxidation rates among 3 different exercise intensities. Therefore, fat metabolism was compared among 1-h constant load tests at Fat max , a higher and a lower intensity. A cohort of 16 male cyclists (28 ± 6 yrs, BMI: 22.5 ± 1.2 kg/m 2 ; n = 8 with maximal oxygen uptake [VO 2max ] of 50–60 ml/min/kg [ET]; n = 8 with VO 2max > 60 ml/min/kg [HET]) completed a maximal incremental cycling test, a submaximal incremental Fat max -test and, thereafter, three 1-h constant-load tests in randomized order at Fat max , one exercise stage below (LOW) and one above (HIGH). LOW, Fat max and HIGH were performed at 52 ± 13, 60 ± 13 and 70 ± 12 % VO 2max . Heart rate and blood lactate were significantly different (p < 0.001). However, the fat oxidation rate showed no difference (p = 0.61). This was also true within each subgroup (ET: p = 0.69, HET p = 0.61). In conclusion, the fat oxidation rate of endurance trained cyclists shows no difference between 1-h constant load exercise bouts at about 50–70 % VO 2max . The precision and necessity of Fat max -tests for controlling the training of fat oxidation are therefore debatable.

Jem Arnold@jemarnold· May 9

@EatsleepfitJeff's excellent modelling paper points to which factors (diet, intensity, fitness, age, etc) explain variability in RER & FatOx Up to 60% variance can be explained by these multiple factors. 30+% variance is attributable to individual diffs pubmed.ncbi.nlm.nih.gov/35829994/

Screenshot of figure: Nine scatterplots showing relationships between respiratory exchange ratio (RER) and nutritional, exercise, and physiological variables. RER shows negative associations with fat intake, fitness level, and type I muscle fibre percentage, and positive associations with carbohydrate intake, glycogen, exercise intensity, and pre-exercise carbohydrate intake. Polynomial or linear trend lines with 95% confidence intervals and reported R2 values are overlaid.

Figure description: Fig. 1 Relationships between respiratory exchange ratio (RER) and factors influencing RER. Best-fit regression lines based on univariable mixed effect models are shown, with fit indicated as R
2
. Best-fit lines using linear regression are shown in green, best-fit lines using polynomial regression are shown in red. Panel (g) is separated by the natural gap in the data of mean age > or <50 years. Shaded areas represent 95% confidence intervals. CHO carbohydrate, DM dry mass.

Jem Arnold@jemarnold· May 9

To add a bit more context, this excellent review summarises all the different operational decisions (methodological differences) that influence results when testing for FatMax under laboratory conditions pubmed.ncbi.nlm.nih.gov/30929281/

Screenshot of text:

5 | CONCLUSIONS

Based on the findings of this systematic review, we suggest that researches measuring MFO and Fatmax using graded exercise protocols by indirect calorimetry should consider some key methodological issues that can considerably affect the accuracy, validity, and reliability of the measurement: (a) ergometer type, (b) metabolic cart used, (c) warm-up protocol (duration and intensity), (d) graded exercise protocol (stage duration and intensities imposed), (e) time interval selected for data analysis, (f) stoichiometric equation selected to estimate fat oxidation, (g) data analysis approach, (h) time of the day when the test was performed, (i) acute nutritional status (fasting time and standard meal conditions established before the incremental graded exercise protocol), and (j) testing days for MFO/Fatmax and VO2max assessment. Likewise, when comparing different studies, it is important to check whether the above-mentioned key methodological issues are similar in such studies to avoid ambiguous and unacceptable comparisons. Further studies are needed to develop a detailed guidelines for MFO and Fatmax assessment using graded exercise protocols by indirect calorimetry.

Jem Arnold@jemarnold· May 9

I was just reminded of this nice test-retest reliability study for intensity at #Fatmax & fat oxidation (g/min) This week are we the red line or the blue line? How about next week?? 🤷‍♂️ Fatmax can be useful, but it isn't magic 🧙‍♂️ pubmed.ncbi.nlm.nih.gov/32488584/

Two-panel figure comparing test-retest values for Trial A and Trial B of (a) peak fat oxidation (g·min⁻¹) and (b) FATMAX (%V̇O₂peak). Individual participant data show wide variability between trials, connected between trials with lines. Blue and red coloured example lines highlight substantial inter-individual variability in changes between trials, where values might substantially increase or decrease between trials A and B.

Jem Arnold@jemarnold· May 7

Quick update {mnirs} 🦵🔦 0.6.3 pushed to CRAN Main improvement with plotting lists of data frames as facets, primarily for extracted intervals Here is how you can extract intervals by time values from data processed with #mnirs, for subsequent analysis (kinetics analysis coming soon🤞) #rstats #nirs

$A screenshot of code excerpt from {mnirs} README https://github.com/jemarnold/mnirs/ demonstrating how to extract intervals by known time values to a list of data frames, then easily plot those intervals. Figure shows two facets with two muscle oxygen saturation channels each during rapid recover after exercise intervals for reoxygenation kinetics. Code excerpt below: extract_intervals(): detect events and extract intervals ## return each interval independently with `event_groups = "distinct"` distinct <- extract_intervals( nirs_data, ## channels blank for "distinct" grouping start = by_time(348, 1064), ## manually identified interval start times end = by_time(458, 1174), ## interval end time (start + 150 sec) event_groups = "distinct", ## return a list of data frames for each (2) event span = c(0, 0), ## no boundary modification zero_time = FALSE ## return original time values ) plot(distinct, time_labels = TRUE)$

Jem Arnold@jemarnold· Apr 30

Anyone else still use autohotkey shortcuts for writing special symbols? Or do the chatbots do it these days?🤔 I just handed down my old script to my grad student colleagues Works system wide, not just in Word! ΔV̇O₂ ≈ 5 ± 2 (mL·kg⁻¹·min⁻¹) 13°C β₁ ≤ α ≠ 𝜏 (†) ¯\_(ツ)_/¯ #academicsky #rstats

Screenshot of .ahk shortcuts:
; symbol, description, and literal execute string in quotations

:*?:/=::{U+2260} ; ≠ not equal to "/="
:*?:~=::{U+2248} ; ≈ approx equal to "~="
:*C?:p=::{U+221D} ; ∝ proportional to "p="
:o?:<=::{U+2264} ; ≤ less than or equal to "<="
:o?:>=::{U+2265} ; ≥ greater than or equal to ">="
:*?:+-::{U+00B1} ; ± plus minus "+-"
:o?:*::{U+00B7} ; · multiplication dot "*`"
:o?:%::{U+00F7} ; ÷ division sign "%`"
:*?:$$::{U+20AC} ; € euro "$$"
:o?:**::{U+00B0} ; ° degree "**`"
:oC?:alpha::{U+03B1} ; α alpha "alpha`"
:oC?:beta::{U+03B2} ; β beta "beta`"
:oC?:D::{U+0394} ; Δ delta "D`"
:oC:u::{U+03BC} ; μ mu "u`"
:oC?:tau::{U+1D70F} ; 𝜏 tau "tau`"
:*?::``::{U+2234} ; ∴ therefore ":`"
:*C?:V`*::V{U+0307} ; dot(V) "V*"
:*C?:Q`*::Q{U+0307} ; dot(Q) "Q*"
:o?:1::{U+2082} ; subscript[1] "1`"
:o?:2::{U+2082} ; subscript[2] "2`"
:o?:-1::⁻¹ ; superscript[-1]

Jem Arnold@jemarnold· Apr 23

I want to make it easier to visually validate our choice of digital filter parameters Filter parameters depend on the signal we're trying to observe and on our data characteristics (e.g. sample rate and raw signal-to-noise ratio) More to come! Tell me when you find new bugs!

Zoomed-in tracing showing distortion at the transition event of an ischaemic occlusion (release/reoxygenation), caused by over-parameterising a Butterworth digital filter order. This distortion may or may not be relevant, depending on our signal of interest. For example, if we care more about Oxy[Haeme] absolute values, or more about the kinetics of the response, we might use different filtering parameters.

Jem Arnold@jemarnold· Apr 23

What looks like noise at a wide timescale in this cycling interval (recorded at 10Hz w/ @artinis.bsky.social) is actually meaningful intra-cadence changes in Oxy[haeme] Zooming in on the occlusion, we see distortion caused by over-parameterising the Butterworth filter order

Zoomed in to a 60-sec portion of data during cycling, showing regular oscillations in Oxy[Haeme] (O2Hb) associated with cadence.

Jem Arnold@jemarnold· Apr 23

Just updated {mnirs} 🦵🔦 app with interactive Plotly for improved no-code workflow processing #muscleoxygenation #nirs #rstats data! Access here: jemarnold-mnirs-app.share.connect.posit.cloud 🔎 Pan & zoom to explore precise time scales 📈️ Compare effects of filtered vs raw tracings A bit more 🧵👇