Papíráčky

@papiracky

Stříhám papír na kusy a lepím je dohromady. I cut paper to pieces and paste them together. I'm making scale models out of (mostly) paper and post (mostly) daily pics. #papercraft #scalemodel #vystrihovanky

72 Folgt348 Follower627 Posts

Bluesky

Ist das dein Profil?Übernimm es — dann gehört dir papiracky.dirty.social.Profil übernehmen

Papíráčky@papiracky· 18d

Attached the storage locker to it's place on the platform. The locker door is holding there by pure willpower for now and I'll glue it once the model is almost complete. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

A detailed view of the locker on the platform with the door open.

A detailed view of the locker on the platform.

A zoomed out view of the whole platform.

Papíráčky@papiracky· 20d

Built a storage locker for the left side of the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

A top/rear view of the locker, along with the interior side of the locker door.

Bottom/front view of the locker and the exterior side of the door.

Papíráčky@papiracky· 22d

Attached the water tank to the platform and added some plumbing to it. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

A view of the water tank on the platform from the rear/right.

And overall view of the truck with the water tank attached.

A rear/left view of the water tank on the platform.

Papíráčky@papiracky· 25d

I've built a water tank for the front part of the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· 27d

Attached the towrope entry/crane hook rest to the platform. The hook rest freely turns in the base. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

A vew of the new structure from the back.

A rear view of the whole structure from a different angle.

A view of the new structure from the top.

Papíráčky@papiracky· 29d

I've built walls for the hook towrope entry mechanism which also serve as a base for the hook rest. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

The walls in a vertical (standing position). Ribs reinforcing the structure are visible on one side of each rib.

The ribs in a vertical position, seen from the other side.

Papíráčky@papiracky· Jul 10

I've built a rest for the crane hook to attach to the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

The hook rest from one side, held in tweezers over a cutting mat. The rest is a half-circle with a metal frame around the round parts and joints along the circle diameter at the straight side.

The hook rest visible from the other side. It's symmetrical and looks prety much the same from both sides.

Papíráčky@papiracky· Jul 8

Added footrests and a little panel to the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jul 6

Built a radio antenna for the platform and attached it to its position on the left locker. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

A front view of the antenna attached to the locker.

A front/left view of the antenna attached to the platform.

A detailed view of the antenna before I glued it to the platform.

A detailed view of the antenna from a different angle.

Papíráčky@papiracky· Jul 3

Built another pulley for the rope winding mechanism. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jul 2

I moved the model too rashly and the cab tore off from the chassis, I guess it's too heavy for the tiny hinges. I hope the cab on real trucks holds better😅 Fortunately, nothing is broken. I'll keep it off for now for easier manipulation. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jul 1

Attached the spool to the platform and added half of a rope winding mechanism. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jun 29

Built a spool for the towrope. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jun 27

I'm starting to worry about the weather station on the balcony. But I'm NOT opening the blinds to save it 😅

Papíráčky@papiracky· Jun 26

There is no escape 🫠

Papíráčky@papiracky· Jun 26

Attached the towrope guide to the back of the platform. The guide can turn freely, though in practice on the model, its position will be fixed by the position of the rope on the model. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jun 24

Attached all the parts to the towrope guide mechanism. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jun 22

I've started building one more pulley system for a towrope guide. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jun 19

Made one more peg, attached everything together, and glued it to the back of the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

View of the back of the platform with everything in place.

A view of the back of the platform with everything together.

The completed base with all parts in place.

Papíráčky@papiracky· Jun 17

The complete moving piece of the hinge. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jun 15

I've completed the drawbar base and added a hinge. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

A view of the base from the "back". This side will be attached to the platform, so there's not much to see here :)

View of the completed base from the top.

View of the completed base from the bottom/left.

Papíráčky@papiracky· Jun 12

Build a cover for the drawbar base. It includes one of those 2mm half-round signal lights, fun stuff. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jun 10

Started building a base for the drawbar. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Jun 8

Built two more pegs and added them and the pulley to the rear part of the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

A detailed view of the pulley and the pegs installed at the rear part of the platform.

A vew of the rear panel of the platform. All the new parts from recent days have been installed, including the pulley and the new pegs.

A detailed photo of the two pegs held in tweezers as the paint on them is drying.

Papíráčky@papiracky· Jun 5

Vacations are over, I finally deleted all the emails from when I was gone, and now I'm back to work (and scale models). I've built a pulley for the tow cable holder. Of course, it turns ⚙️ #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· May 25

I'm not going to make the #bastillebuild but here's a photo that is at least 50% France to compensate. Enjoy the builds everyone!

a photo of a mountain ridge with a steep cliff on the left.

Papíráčky@papiracky· Mar 18

I forgot to attach the photos to the previous post, so there they are. I really need those vacations😅 Original post: Built more hinges for the back of the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

Papíráčky@papiracky· Mar 16

Attached the hinges with the pegs to the back of the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

A zoomed out view of the back of the platform.

Papíráčky@papiracky· Mar 13

Built pegs for the hinges. The pegs are built from copper wires of different widths. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels

The pegs that will be used to the hinges.

Papíráčky@papiracky· Mar 11

Built hinges for the back of the platform. #papercraft #Tatra815 #AV15 #scalemodel #histscalemodels