Logan's Hobby Lair

@loganshobbylair

Amateur Maker and miniature hobbyist. Absolute Adeptus Mechanicus/Mechanicum FANATIC!

1,197 Following362 Followers117 Posts

Reddit Twitch Bluesky

amateur

Is this your profile?Claim it and loganshobbylair.dirty.social is yours.Claim profile

Logan's Hobby Lair@loganshobbylair· 1d

It's #wipwednesday, I was pretty busy this week so far with not much to show yet, but I did finally glue Roger's spine together. Will probably post more #wip stuff soon though as I hopefully will have some more time later this week. #hobby #3dprinting #3dprint

A clamped 3D printed black PETG spine for a life sized replica of a battle droid designed by Droid Division: https://www.droiddivision.com/, sitting on top of a well used grey silicone mat which is on top of a grey cutting mat. some epoxy and superglue can be seen in the background and on the work surface.

Logan's Hobby Lair@loganshobbylair· 7d

A Glyphid Bulk Detonator from the Deep Rock Galactic Board game I did a while ago.

Front view of a Glyphid Bulk Detonator from the Deep Rock Galactic Board game. Model has a heavily calloused Burt red to orange skin that gives way to a number of Yellow tumorous growths (these serve as weak points in the video game)

Left side view (its left) of a Glyphid Bulk Detonator from the Deep Rock Galactic Board game. Model has a heavily calloused Burt red to orange skin that gives way to a number of Yellow tumorous growths (these serve as weak points in the video game)

Right side view (its right) of a Glyphid Bulk Detonator from the Deep Rock Galactic Board game. Model has a heavily calloused Burt red to orange skin that gives way to a number of Yellow tumorous growths (these serve as weak points in the video game)

Logan's Hobby Lair@loganshobbylair· 8d

It's #WipWednesday, mainly worked on painting Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini). I decided to try NMM as I haven't tried that yet, still going back and forth with the light placement but I am figuring it out as I go. #miniatures #wip #paintslam26 #nerdlings

Front view of WIP Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini) https://www.smashbash.org/shop/p/wittle-goblin-miscast. Held in hand on a painting handle with a well worn grey silicone mat in the background

(Her left) side view of WIP Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini) https://www.smashbash.org/shop/p/wittle-goblin-miscast. Held in hand on a painting handle with a well worn grey silicone mat in the background

Rear view of WIP Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini) https://www.smashbash.org/shop/p/wittle-goblin-miscast. Held in hand on a painting handle with a well worn grey silicone mat in the background

(Her right) side view of WIP Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini) https://www.smashbash.org/shop/p/wittle-goblin-miscast. Held in hand on a painting handle with a well worn grey silicone mat in the background

Logan's Hobby Lair@loganshobbylair· 15d

It's #WipWednesday, Mainly worked on Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini). Was aiming to paint her for the "Gobsmacked" Exhibition on Baselair, but not sure if she will be done in time. I also did glue together most of Roger over the weekend. #miniatures #Wip

Front view of Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini) https://www.smashbash.org/shop/p/wittle-goblin-miscast. various paints, hobby supplies, and other projects can be seen in the background.

Side (Her left) view of Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini) https://www.smashbash.org/shop/p/wittle-goblin-miscast. various paints, hobby supplies, and other projects can be seen in the background.

Rear view of Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini) https://www.smashbash.org/shop/p/wittle-goblin-miscast. various paints, hobby supplies, and other projects can be seen in the background.

Side (Her right) view of Loigoin the Goblin Necromancer (Kitbash of Witty Goblin x MISCAST Mini) https://www.smashbash.org/shop/p/wittle-goblin-miscast. various paints, hobby supplies, and other projects can be seen in the background.

Logan's Hobby Lair@loganshobbylair· 22d

#WipWednesday Partially glued together Roger, with the amount of epoxy and CA glue I’m using I do the gluing outside, had to stop due to heat right now. Saw a community challenge on Baselair "Gobsmacked", so I think I have a mini picked out for that. Also working on another Zaku!

A hand holding a life sized B1 battle droid head 3D printed black PETG parts for a life sized replica of a battle droid designed by Droid Division: https://www.droiddivision.com/, various paints, hobby supplies, and other projects can be seen in the background.

Witty Goblin x MISCAST Metal Miniature from Smashbash https://www.smashbash.org/shop/p/wittle-goblin-miscast, placed on top of a Fiskers grey and white cutting Matt.

A partially built HGGTO MS-06C-6/R6 Zaku II Type C-6/R6 kit (upper torso) being held in front of it's box.

Logan's Hobby Lair@loganshobbylair· 29d

#WipWednesday Roger's dry fit is mostly complete, but I need to glue some parts together before he will in one piece (Starting this weekend if everything goes to plan). Finished HG Aerial from last week, and brainstorming possible models for #Nerdlings #miniofthemonth . #3dprinting #gunpla #gundam

Partial free standing assembly of 3D printed black PETG parts for a life sized replica of a battle droid designed by Droid Division: https://www.droiddivision.com/

HG 1/144 GUNDAM AERIAL Kit from Bandai, assembled and displayed on a stand with a wooden cabinet interior in the background.

A few plastic miniatures from Archon Studio Dungeons & Lasers Fantasy Miniatures Set https://archon-studio.com/shop/products/dungeons-lasers/fantasy-miniatures-set. Specifically: Siren 1, Siren 2, and Lady of the Lake. the miniatures are placed on top of a well loved gray silicon mat work surface.

Logan's Hobby Lair@loganshobbylair· Jul 9

#WipWednesday I was pretty busy again this week, focused on hobby space re-organization. But I did find some time to cut some steel conduit to serve as Rogers support structure, partial dry fit to check the cuts. Also working on my Gunpla backlog a bit, HG Aerial is current #WIP #3dprinting #Gunpla

A partially built High Grade Gundam Aerial kit (Head and upper torso) being held in a hand in front of the box for said kit.

Logan's Hobby Lair@loganshobbylair· Jul 2

Osterhilt from the Mörderin by John Blanche Kickstarter is done! My submission for #MiniOfTheMonth for June 2026 ran by @andycruns.bsky.social. I thought I should post the pics here as well Also credit to @handiworkgames.bsky.social who made the backdrop book I used for these pictures. #Nerdlings

Front (her) left side view of Osterhilt from the Mörderin by John Blanche Kickstarter. Painted in desaturated blue armor with bright red accent pieces and featuring a white checkered pattern and hazard stripes, based on a large orange brown jagged boulder at a slant with sun bleached skulls, dry looking tufts, and rusted pipes surrounding it

Rear (her) left side view of Osterhilt from the Mörderin by John Blanche Kickstarter. Painted in desaturated blue armor with bright red accent pieces and featuring a white checkered pattern and hazard stripes, based on a large orange brown jagged boulder at a slant with sun bleached skulls, dry looking tufts, and rusted pipes surrounding it

Rear (her) Right side view of Osterhilt from the Mörderin by John Blanche Kickstarter. Painted in desaturated blue armor with bright red accent pieces and featuring a white checkered pattern and hazard stripes, based on a large orange brown jagged boulder at a slant with sun bleached skulls, dry looking tufts, and rusted pipes surrounding it

Front (her) Right side view of Osterhilt from the Mörderin by John Blanche Kickstarter. Painted in desaturated blue armor with bright red accent pieces and featuring a white checkered pattern and hazard stripes, based on a large orange brown jagged boulder at a slant with sun bleached skulls, dry looking tufts, and rusted pipes surrounding it

Logan's Hobby Lair@loganshobbylair· Jul 2

#WipWednesday I was pretty busy this week and almost all my hobby time went towards finishing Osterhilt, but I did use up an ancient roll of PLA I turned into some barriers and a crater (finished off with some white). Hopefully next Wednesday I'll have more WIP to show y'all!

A 3D printed crater and ten 3D printed barriers printed in a light blue PLA (with a little white PLA) on top of a well loved gray silicon mat work surface.

Logan's Hobby Lair@loganshobbylair· Jun 29

#wip Got Osterhilt from the Mörderin by John Blanche Kickstarter based and primed! decided to use a 32mm base so i could make it a bit more dynamic instead of the included"slota" 25mm base. looking to paint her up with the colors from the John Blanche paint sets 1 & 2 tomorrow. #nerdlings

Got Osterhilt from the Mörderin by John Blanche Kickstarter based on a 32mm base that features a large slanted rock with various bits decorating it and Zenithal primed. View from her left side. various paints, hobby supplies, and other projects can be seen in the background.

The paints from the John Blanche paint sets 1 & 2 by the Army Painter spread out on top of a well loved gray silicon mat work surface.

Logan's Hobby Lair@loganshobbylair· Jun 29

My Armageddon box is finally here! Also got a Mandalorian Army Box while I was at it, so it looks like I have no shortage of hobby projects to work on for the immediate future.

A copy of the Warhammer 40,000: Armageddon Box set on top of a well loved gray silicon mat that is on top of a grey cutting mat surrounded by various work in progress miniatures, paints, super glue, superglue accelerator, and other hobby tools and supplies scattered around the work surface.

A copy of the Star Wars: Legion - Mandalorian Special Edition Army Box set on top of a well loved gray silicon mat that is on top of a grey cutting mat surrounded by various work in progress miniatures, paints, super glue, superglue accelerator, and other hobby tools and supplies scattered around the work surface.

Logan's Hobby Lair@loganshobbylair· Jun 25

#wipwednesday Been Printing and assembling more legally distinct hive of scum and villainy 3D printed Terrain. Assembled Osterhilt from the Mörderin Kickstarter, considering building a large fancy base for them. And tested some Seymour filler primer for 3D prints I wanted to try.

A large brown cardboard box (furniture sized) filled with a large amount of assembled legally distinct hive of scum and villainy 3D printed Terrain along with a spaceship in the bottom left printed in white PLA Plastic. Some of the pieces have gaps filled with red sprue goo during the initial assembly where the parts didn't want to fit perfectly.

Osterhilt from the Mörderin by John Blanche Kickstarter sitting freshly assembled on a small plastic resealable bag next to a classic black "slota" style miniature base on a well loved grey silicone work surface surrounded by various hobby tools used for assembly.

Logan's Hobby Lair@loganshobbylair· Jun 11

#wipwednesday Been putting together some 3D printed Terrain of a legally distinct hive of scum and villainy, painting up Agent ZO, I think Its the perfect time to paint up a mini from the Mörderin Kickstarter, and printing a Battle Droid Replica, naming him Roger naturally.

Some pieces of 3D printed Terrain of a legally distinct hive of scum and villainy sitting on top of a gray silicon mat that is on top of a grey cutting mat. Printed in white PLA plastic surrounded by tubes of super glue, sprue goo, plastic cement, and various other hobby supplies.

A hand holding a partially painted miniature of Agent Zo along with a book mark being used as a reference from @badsquiddogames Kickstarter: Women of WW2: Resistance.

A hand holding an grey unbuilt miniature along with "slotta" style base in a small resealable plastic bag from the Mörderin Kickstarter.

A large card board box containing a pile of 3D printed black PETG parts for a life sized replica of a battle droid designed by Droid Division: https://www.droiddivision.com/

Logan's Hobby Lair@loganshobbylair· Jun 9

I currently have a webcam on an arm that clamps to my desk along with a similar desk lamp and some overhead lights. I plug the webcam into my computer and record with OBS or other recording software. This setup isn’t too expensive and does the basics, might be an option depending on your needs.

A picture of a webcam mounted on a desk clamping arm along with a desk clamping magnifying glass ring lamp combo. The background contains a wall mounted pegboard with organizers for hobby supplies and paints, and a moderately messy desk milled with work in progress hobby projects and supplies scattered around.

Depicts two desk clamps that belong to an arm and mount for a webcam, and for a magnifying glass ring light combo desk lamp. Wires travel off screen towards power outlets and a computer that runs the recording software for the webcam to capture footage from the hobby work desk area. Part of the work surface is visible and has wet pallets, paint brushes, keyboards, and other hobby and computer related objects scattered around the work surface.

Logan's Hobby Lair@loganshobbylair· Jun 3

I am absolutely devastated to learn that John Blanche has passed away. His work has influenced generations of hobbyists, with many finding his Grimdark style to be the heart and soul of Warhammer and beyond. He will be dearly missed by myself and the whole community. May you Rest In Peace John.

A Facebook post from Trish Carden Miniatures and Design aka monstergirl_trish, who is a friend of John Blanch, breaking the news of his passing. The post contains the following message along with a youthful picture of John Blanch: "I’m afraid I bring you some very sad news today.
John Blanche’s wife Lin has asked me to let you all know that John passed away a couple of days ago.
John was an inspirational artist, devoted to his family and a good friend to many. Always generous with his time and knowledge, he was very well loved by all who knew and worked with him. He’ll be hugely missed.
The world of Warhammer was brought to life by his vision of the grimdark setting and I know his art meant a lot to so many of you. He leaves behind an enormous legacy that has enriched many people’s lives.
The family will say goodbye to John privately but there will be a get together in the future for everyone to celebrate John’s life.
Kosk yn kres old friend."

Logan's Hobby Lair@loganshobbylair· Feb 19

So I started organizing my hobby related tasks on a Kanban board with some reusable label magnets. I feel that having a physical reminder in a conspicuous place helps me better visualize and work towards making some progress on my hobby goals and work towards getting some minis done for #Paintslam26

A Wall mounted black Kanban board with three categories: "To Do", "Doing", and "Done" written in white wet erase marker or Chalk marker. In each categories are White magnets which are reusable labels that one can write on with a permanent marker and erase with a standard eraser. The White magnet labels have various hobby projects and goals written on them.

Logan's Hobby Lair@loganshobbylair· Feb 10

Looks like I'm a bit further north, but 👋!

A screenshot of the "Tabletop Wargaming & Miniature Painting Community" section of the Bluesky map (bluesky-map.theo.io) with the user (@loganshobbylair) near the center of the cluster

Logan's Hobby Lair@loganshobbylair· Dec 31

Had a little time in between all the family gatherings for the holidays to do a little hobby. Was able to prime up some Minis from the recent Bad Squiddo Women of WW2: Resistance Kickstarter. Looks like they will be the first minis I get to paint of the new year! #nerdlings #wip #PaintingMiniatures

A group of five unprimed miniatures from the Bad Squiddo Women of WW2: Resistance Kickstarter attached to painting magnetic handle tops on a turn table inside a airbrush spray booth. These specific miniatures are as follows: Simone Segouin AKA Nicole Minet, or the French Resistance. Hannie Schaft, Freddie Oversteegen, and Truus Oversteegen of the Dutch Resistance. Agent ZO AKA Elzbieta Zawacka of the Polish Land Forces Union of Armed Struggle.

A group of five miniatures from the Bad Squiddo Women of WW2: Resistance Kickstarter, primed in black with a Zenithal highlight of white ink from above, attached to painting magnetic handle tops on a turn table inside a airbrush spray booth. These specific miniatures are as follows: Simone Segouin AKA Nicole Minet, or the French Resistance. Hannie Schaft, Freddie Oversteegen, and Truus Oversteegen of the Dutch Resistance. Agent ZO AKA Elzbieta Zawacka of the Polish Land Forces Union of Armed Struggle.

Logan's Hobby Lair@loganshobbylair· Dec 17

Excited to have my Kickstarter shipment from @badsquiddogames.bsky.social come in today! While its a busy time of the year, I'm hoping to set aside some time to start working on these Minis and try out one of these backdrop books from @handiworkgames.bsky.social that I keep seeing people use.

A shipment from @badsquiddogames.bsky.social containing various miniatures, a backdrop book from @handiworkgames.bsky.social and hobby goodies spread out over a work surface culling mat for display purposes. Much of this is from the Women of WW2: Resistance (Hand Sculpted & Cast) Kickstarter that @badsquiddogames.bsky.social had.

Logan's Hobby Lair@loganshobbylair· Dec 17

Recently painted up a Glyphid Bulk Detonator from the Deep Rock Galactic Board game for a friends birthday gift. This ended up as practice for airbrush blends! I have another one for myself That is currently WIP. #deeprockgalactic #drg #wepaintminis #hobby #miniatures #Nerdlings #miniaturepainting

Rear view of a Glyphid Bulk Detonator from the Deep Rock Galactic Board game. Model has a heavily calloused Burt red to orange skin that gives way to a number of Yellow tumorous growths (these serve as weak points in the video game)

Logan's Hobby Lair@loganshobbylair· Jun 13

I have to say as my first experience with Gunpla, I'm impressed by this a 10-12 USD beginner kit. It took about 40 minutes to casually put together while watching the original Mobile Suit Gundam. I'm definitely looking forward to pick up more kits in the future! #gunpla #gundam #hobby

An Entry Grade 1/144 RX-78-2 Gundam from Bandai, built and stood up on a cutting mat with the instruction booklet placed in front of it.

Logan's Hobby Lair@loganshobbylair· Jun 13

I have been very busy as of late, and have been neglecting my hobby time. After seeing others I follow posting Gunpla, I thought I'd give it a try as a way to get back into the hobby grove. It also gives me an excuse to give the originals a watch before they are removed from Netflix. #gunpla #gundam

An unopened Gunpla box containing the Entry Grade 1/144 RX-78-2 Gundam from Bandai se in front of a monitor displaying the intro to the original Mobile suit Gundam on Netflix.

Logan's Hobby Lair@loganshobbylair· Jan 7

Currently working on getting my hobby space in order, but I managed to finish up a few minis in between reorganizing. Hope to get more of the Deep Rock Galactic board game minis painted up soon, Rock and stone! #deeprockgalactic #drg #wepaintminis #hobby #miniatures #Nerdlings #miniaturepainting

A pair of Glyphid Grunt Slashers from the Deep Rock Galactic board game (front view)

A pair of Glyphid Grunt Slashers from the Deep Rock Galactic board game (rear and side view)

Logan's Hobby Lair@loganshobbylair· Dec 24

I have been a bit busy and haven’t posted hobby for a bit, but I’ve been working on a few things behind the scenes. One of which is a gift for my brother who is a big League of Legends and Arcane fan. I’m happy how this came out, and I’m excited to see his reaction. #arcane #hobby #3dprinting

A 3D printed “Chompers” prop (grenade and bear trap combo) from League of Legends/Arcane. Has some neon “Jinx” style graffiti painted on it as well. (Front side view)

A 3D printed “Chompers” prop (grenade and bear trap combo) from League of Legends/Arcane. Has some neon “Jinx” style graffiti painted on it as well. (Other front side view)

A 3D printed “Chompers” prop (grenade and bear trap combo) from League of Legends/Arcane. Has some neon “Jinx” style graffiti painted on it as well. (Rear side view)

A 3D printed “Chompers” prop (grenade and bear trap combo) from League of Legends/Arcane. Has some neon “Jinx” style graffiti painted on it as well. (Rear other side view)

Logan's Hobby Lair@loganshobbylair· Oct 19

Currently working on a large group of Skitarii and a couple of Glyphid slashers from the Deep Rock Galactic board game.

A large group of 20 Skitarii in a mar-like scheme. WIP

A couple of Glyphid slashers from the Deep Rock Galactic board game. WIP

Logan's Hobby Lair@loganshobbylair· Oct 18

Hello everyone! I’m Logan, and I paint minis and occasionally other things. Looking to improve and get inspired by all the other talented hobbyists out there! #warhammer #miniaturepainting #Wargaming #wepaintminis #warhammercommunity #hobby #miniatures #Nerdlings